Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: The SpringWell well water system (models WS1 and WS4) is a single-tank air-injection iron filter that SpringWell rates for up to 7 ppm iron, 8 ppm hydrogen sulfide and 1 ppm manganese, with no cartridges or chemicals to buy. It’s a strong fit for a well with rotten-egg smell, orange stains or black specks, as long as a lab test shows your levels fall inside those limits. It does not disinfect, soften water or carry an NSF, WQA or IAPMO certification on its product page, so it’s a problem-solver for nuisance minerals rather than a complete well treatment.
Key takeaways
- What it fixes: iron, manganese and hydrogen sulfide (the sulfur smell), using oxidation inside the tank plus greensand media and a nightly backwash.
- Two sizes: WS1 for 1–4 bathrooms (12 gpm) and WS4 for 4+ bathrooms (20 gpm).
- Cost: SpringWell’s well water category page lists the system starting at about $2,231; a required well water test adds about $134.
- No certification listed: the official page names no NSF/ANSI, WQA or IAPMO certification, so treat the removal ratings as manufacturer claims.
- Not for bacteria: SpringWell warns not to use it where water is microbiologically unsafe; add UV or disinfection if your well tests positive for coliform.
SpringWell well water system quick facts
| Spec | WS1 | WS4 |
|---|---|---|
| Recommended home size | 1–4 bathrooms | 4+ bathrooms |
| Service flow rate | 12 gpm | 20 gpm |
| Tank size | 10 in wide, 54 in tall (64 in with head) | 13 in wide, 54 in tall (64 in with head) |
| Max iron | up to 7 ppm | up to 7 ppm |
| Max hydrogen sulfide | up to 8 ppm | up to 8 ppm |
| Max manganese | up to 1 ppm | up to 1 ppm |
| Operating pressure / temp / pH | 25–80 psi; 36–120°F; pH 6.5–10 | same |
| Connection | 1 in, MNPT fittings included | same |
| Approx. starting price | about $2,231 (category page) | higher; check SpringWell’s site |
| Media life (claimed) | 10+ years | 10+ years |
| Warranty | Lifetime on covered defects; 5 years on electronic head | same |
| Return window | 6-month money-back (uninstalled, 10% restocking fee) | same |
How the SpringWell well water filter works
The system is built around one tall mineral tank with an electronic control head. At the top of the tank sits a pocket of air. As raw well water passes through that oxygen-rich zone, dissolved iron, manganese and hydrogen sulfide oxidize, turning from invisible dissolved forms into tiny particles. Below the air pocket, a bed of greensand fusion media catches those particles.
Every night, on a schedule you set, the head runs a backwash: it reverses flow, flushes the trapped rust and sulfur particles down a drain line and draws in fresh air to rebuild the pocket. SpringWell calls this air-injection oxidation (AIO) and notes it uses no chemicals and needs no refills. The head has Bluetooth control for setting and adjusting the schedule from a phone.
This is the same basic chemistry that university extension services describe for iron and sulfur: oxidize first, then filter. Air works well for moderate levels. Very high hydrogen sulfide, iron bacteria or water that also has tannins usually needs a stronger oxidant such as chlorine or hydrogen peroxide injection, which SpringWell sells separately as a chemical injection system. Our guide to sulfur smell in well water covers how to tell which approach you need.
Who it’s for (and who should skip it)
A good fit if:
- Your well water smells like rotten eggs, stains fixtures orange or brown, or leaves black specks from manganese.
- A lab test shows iron at or below 7 ppm, hydrogen sulfide at or below 8 ppm and manganese at or below 1 ppm.
- Your pH is between 6.5 and 10 and your well pump delivers 25–80 psi.
- You want a system without cartridges to swap or chemicals to refill.
Look elsewhere if:
- Your well has coliform bacteria or E. coli. This filter does not disinfect; you’d need a UV system or chlorination (SpringWell offers UV as an add-on).
- Your main problem is hardness. Iron filters don’t soften; you’d need a softener, which SpringWell sells in combo packages.
- You’re on city water with chlorine or chloramine. A carbon whole-house filter such as the SpringWell CF1 is the right product there.
- You need certified reduction of a health contaminant such as arsenic, nitrate or PFAS. Those call for a certified reverse osmosis system at the kitchen tap.
Certifications
We found no certification on SpringWell’s product page for this system: it doesn’t name NSF/ANSI, WQA or IAPMO testing, and it describes the air-injection process as patented rather than certified. In our earlier SpringWell CF1 review we also didn’t find SpringWell products in NSF’s listings. That doesn’t mean the system doesn’t work; iron and sulfur filters are commonly sold on manufacturer ratings. But it means the 7/8/1 ppm figures are SpringWell’s own claims, so it’s smart to retest your water after installation.
Costs, including yearly cost
Upfront: SpringWell’s well water category page lists the Whole House Well Water Filter System starting at about $2,231.25. The product page itself showed no standalone price when we checked, and SpringWell frequently runs sitewide sales (a 15% promotion was advertised), so the price you see may differ. All prices are approximate.
Required test: SpringWell holds orders until a Level 1 + Bacteria well water test (about $134.25) is completed, and cancels with a full refund if the results show the system isn’t a match. We like this policy; it stops people from buying the wrong equipment.
Optional add-ons: a bypass valve (about $58.79), a UV purification system and a smart leak monitor are offered on the same page. Combo packages pair the filter with a salt-based softener (starting around $3,124) or a salt-free conditioner (starting around $3,213).
Yearly cost: there are no cartridges in the main tank and SpringWell claims a 10+ year media life, so routine yearly spending is low. Expect small costs for the water and electricity used by nightly backwashing (SpringWell doesn’t publish these), an annual lab test of your well (a good habit anyway), and eventually a media replacement. If you add a sediment prefilter or UV system, budget for their cartridges or lamps too.
Installation
The system is designed for do-it-yourself installation by a handy homeowner, but most people will want a plumber. You’ll need:
- Floor space near the pressure tank for a tank about 10–13 inches wide and roughly 64 inches tall with the head.
- A drain within reach for the backwash line, and a standard outlet for the included power supply.
- A 1-inch connection (MNPT fittings are included) and a bypass valve so you can isolate the system.
- Protection from freezing; SpringWell’s warranty excludes freeze damage.
SpringWell provides an installation guide PDF and video. Place the iron filter after the pressure tank and before any softener or UV unit, so later equipment sees clean water.
Pros and cons
Pros
- Handles iron, manganese and sulfur smell in one tank.
- No cartridges, salt or chemicals for the filter itself.
- Two flow sizes, including a 20 gpm model for large homes.
- Required water test reduces the chance of buying the wrong system.
- Lifetime warranty on covered defects and a 6-month return window for uninstalled units.
Cons
- No NSF, WQA or IAPMO certification listed on the official page.
- Starting price over $2,000 before installation.
- Needs a drain and power, and wastes some water on nightly backwash.
- Not a disinfection system and doesn’t soften water.
- Warranty terms list water-quality conditions, including one about hydrogen sulfide, that are worth reading before you buy if sulfur is your main problem.
Verdict
If a lab test shows iron, manganese or hydrogen sulfide within SpringWell’s limits, the WS1 or WS4 is a clean, low-maintenance way to get rid of stains and rotten-egg smell without handling chemicals. Choose the WS1 for most homes and the WS4 if you have more than four bathrooms or high simultaneous demand. The lack of a listed certification and the warranty fine print are the main reasons to slow down: test first, confirm the system fits your numbers, and retest after installation. If your well also has bacteria or hard water, plan the full treatment train before you buy.
For more options, see our well water hub and the full list of more reviews.
Frequently asked questions
Does the SpringWell well water system remove sulfur smell?
SpringWell rates the WS1 and WS4 to remove up to 8 ppm of hydrogen sulfide, the gas that causes rotten-egg smell, using air-injection oxidation and a nightly backwash. Levels above that, or sulfur caused by a water heater anode, need a different fix.
What is the difference between the SpringWell WS1 and WS4?
The WS1 is sized for 1–4 bathrooms with a 12 gpm service flow and a 10-inch tank. The WS4 is for 4 or more bathrooms with a 20 gpm flow and a 13-inch tank. Removal ratings are the same.
Is the SpringWell well water filter NSF certified?
SpringWell’s product page lists no NSF/ANSI, WQA or IAPMO certification for this system, so its iron, manganese and hydrogen sulfide ratings are manufacturer claims.
Sources: SpringWell Whole House Well Water Filter System product page; SpringWell well water category page (starting prices); SpringWell chemical injection system page. Prices and specifications change; check SpringWell’s site for current figures.