Tap Water by City

Tap Water by City: illustration of a city skyline with a water drop

Short answer: your water utility publishes a water quality report every year. It shows where your water comes from, which disinfectant it uses, and which contaminants were detected. Read it before you buy a filter: it tells you what problem, if any, you are actually solving.

Key takeaways

  • Community water systems must deliver an annual water quality report, called a Consumer Confidence Report (CCR), to customers by July 1 each year.
  • The report lists detected contaminants next to their legal limits (MCLs) and health goals (MCLGs).
  • Below the legal limit does not mean zero. Health goals are often lower, which is why some people filter anyway.
  • Private wells are not covered. Well owners should test their water.

City water pages

We are building one page per city, each based on that utility’s latest report. To see what each page covers, start with Philadelphia tap water: where the water comes from, PFAS results, lead and hardness by neighborhood. All city pages so far:

Want your city next? Tell us.

How to find your own report

  • Search your utility’s website for “water quality report” or “Consumer Confidence Report”.
  • Check your water bill: many utilities print the report link on it.
  • Your state drinking water program often posts reports too.

How to read it in 5 minutes

  1. Source. River, lake, reservoir or groundwater. Groundwater is more often hard.
  2. Disinfectant. Chlorine or chloramine. This decides which whole-house filter media works.
  3. Detected contaminants table. Compare the highest level detected with the MCL (legal limit) and the MCLG (health goal).
  4. Lead and copper. Reported as the 90th-percentile level from home taps. Lead usually comes from older plumbing in the building, not the treatment plant.
  5. Violations. Any violations during the year must be explained in the report.

From report to filter

If your report shows Consider
Chlorine or chloramine taste and smell Whole-house filter or a certified pitcher
Lead in the home-tap results, or an older home A filter certified to NSF/ANSI 53 for lead (see what filter removes lead)
PFAS detected Reverse osmosis or a filter with a PFAS certification listing
High hardness A water softener
Nothing above health goals You may not need a filter at all

Frequently asked questions

Is my tap water safe to drink?

If your utility meets federal standards, your water is legal to drink. The report shows whether it met them last year. If you have specific concerns, such as an older home with lead pipes, a certified filter and a home test can help.

Why does my water test differ from the city report?

The report reflects the water leaving the treatment plant and sampled across the system. Your home’s pipes, fixtures and water heater can change what comes out of your tap.

Does my report cover PFAS?

Reporting of PFAS has expanded in recent years, but coverage varies by utility and year. Check the detected contaminants table and your utility’s website.

Sources: EPA: Understanding your annual water quality report · EPA: Private drinking water wells

Related guides: How to Read Your City's Water Quality Report