Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: Columbus tap water in 2025
Columbus tap water met every federal drinking water standard in 2025, according to the latest consumer confidence report from Columbus Water & Power, which lists no violations. The details worth knowing are moderately hard water, seasonal nitrate from farm runoff in the Scioto River, disinfection byproducts near the upper end of the city’s range, and old lead and galvanized service lines that the city is still replacing.
For most homes, that points to a carbon filter for taste and byproducts, a certified lead filter if your service line is lead or unknown, and maybe a softener if scale bothers you. Every number below comes from the utility’s 2025 report; the values shift from year to year.
Key takeaways
- No violations in 2025. Each regulated contaminant in the report is marked as compliant.
- Hardness runs 98 to 125 ppm (about 5.7 to 7.3 grains per gallon), depending on which of the three plants supplies your area.
- Lead at the 90th percentile was 1.3 ppb in the 2023 round of home sampling, with none of the 50 homes above the 15 ppb action level. The city plans to replace all lead and galvanized lines by 2040.
- The 2025 report contains no PFAS test results. Federal PFAS monitoring starts in 2027.
Where does Columbus tap water come from?
Columbus draws on two rivers and an aquifer, and each source feeds its own treatment plant:
- Dublin Road Water Plant treats the Scioto River, stored behind Griggs and O’Shaughnessy reservoirs.
- Hap Cremean Water Plant treats Big Walnut Creek water held in Hoover Reservoir.
- Parsons Avenue Water Plant pumps groundwater from sand and gravel deposits in the Scioto River valley.
Chlorine is the disinfectant both at the plants and in the pipes, so Columbus water does not use chloramine. Total chlorine averaged 0.97 to 1.44 ppm depending on the plant, well under the 4 ppm maximum. Bromate shows up only at Dublin Road, which tells you that plant uses ozone as part of treatment. Dublin Road also runs an anion exchange process to strip nitrate out on the occasions when the Scioto carries high levels, usually in spring after fertilizer runoff.
The report also notes that Cryptosporidium was found in raw river water (2 of 12 Scioto samples and 7 of 12 Big Walnut samples), but not in treated water from either surface plant.
Columbus water hardness
The three plants deliver slightly different water. Dublin Road averaged 125 ppm of hardness (7.3 grains per gallon), Hap Cremean 98 ppm (5.7 gpg) and Parsons Avenue 123 ppm (7.2 gpg). On the usual scale, anything from about 61 to 120 ppm is moderately hard and above 120 is hard, so Columbus straddles the line.
At this level you will see some white spotting on glasses and a slow buildup in kettles and showerheads, but not the heavy crust that very hard water leaves. A softener is optional here. It makes the most sense if you live in a Dublin Road or Parsons Avenue service area, have a tankless water heater, or are tired of descaling. Keep in mind that a salt-based softener adds sodium, and Columbus water already carries 19 to 87 ppm of sodium on average by plant (up to 119.7 ppm at Dublin Road). Our softener vs filter guide walks through the trade-offs.
What was detected in Columbus water in 2025
Below are the regulated contaminants the 2025 report lists as detected. Where the plants differ, the highest plant figure is shown with the plant noted. The level column is the reported average or compliance value, with the single highest sample in brackets when the report gives one.
| Contaminant | Highest level | Legal limit (MCL) | Health goal (MCLG) | Typical source |
|---|---|---|---|---|
| Nitrate | 6.3 ppm (Dublin Road; range ND–6.3) | 10 ppm | 10 ppm | Fertilizer runoff |
| Fluoride | 0.98 ppm (Parsons Ave; max 1.03) | 4 ppm | 4 ppm | Added for dental health |
| Barium | 0.02 ppm (Hap Cremean) | 2 ppm | 2 ppm | Natural mineral deposits |
| Cadmium | 0.001 ppm (Hap Cremean) | 0.005 ppm | 0.005 ppm | Natural mineral deposits |
| Atrazine | 0.2 ppb (Dublin Road; max 0.84) | 3 ppb | 3 ppb | Herbicide runoff |
| Simazine | 0.01 (Dublin Road; max 0.06; units not printed) | 4 | 4 | Herbicide runoff |
| Total trihalomethanes (TTHM) | 64.1 ppb (Hap Cremean); Dublin Road single sample up to 83.9 | 80 ppb | None | Chlorine byproduct |
| Haloacetic acids (HAA5) | 37 ppb (Hap Cremean; max 41.1) | 60 ppb | None | Chlorine byproduct |
| Bromate | 2 ppb (Dublin Road; max 13) | 10 ppb | 0 | Ozone byproduct |
| Turbidity | 0.68 NTU (Hap Cremean); 97% of samples met the standard | Treatment technique | None | Soil runoff |
Two rows stand out. Single bromate and TTHM samples at Dublin Road rose above the number in the limit column, but these rules are judged on running averages, and the report marks both as compliant. The Hap Cremean TTHM average of 64.1 ppb is printed above that plant’s listed range of 22.8 to 60.3 ppb; the report doesn’t explain the mismatch, so we show the figures as published. Columbus also listed unregulated results, mostly individual trihalomethanes such as chloroform (up to 23.5 ppb at Hap Cremean) and trace metolachlor.
Lead and copper in Columbus
The most recent home tap sampling in the report is from 2023. Across 50 homes, the 90th percentile for lead was 1.3 ppb and for copper 0.049 ppm, and no home exceeded either action level (15 ppb lead, 1.3 ppm copper). The utility says lead was not detected in water leaving its plants; lead comes from pipes on the way to the faucet.
Columbus still has lead and galvanized service lines and aims to replace all of them, public and private sides, by 2040. You can look up your address in the city’s online service line inventory, call 614-381-9949 for free lead testing, and ask about the Lead Elimination Assistance Program, which offers a no-interest loan for the private-side replacement. If your line is lead, galvanized or unknown, a filter certified to NSF/ANSI 53 for lead is a sensible bridge. See what filter removes lead for how to check a certification.
Violations
None reported for 2025. Every regulated contaminant in the report is marked “No” in the violation column.
Do you need a filter in Columbus?
Not for legal compliance, but a few results line up with specific filter types:
- Chlorine taste and byproducts: TTHM and HAA5 are well within limits on average yet higher than in many cities. A carbon pitcher or faucet filter certified to NSF/ANSI 42 handles taste; for TTHM reduction look for an NSF/ANSI 53 VOC or TTHM claim. Start at pitchers and shower filters.
- Nitrate, sodium and PFAS questions: standard carbon does little for nitrate or sodium. An under-sink reverse osmosis system certified to NSF/ANSI 58 reduces both and is also the usual pick if PFAS testing later turns something up.
- Lead lines: any older home awaiting replacement benefits from a certified lead filter at the kitchen tap.
- Whole-home chlorine and scale: a whole-house carbon filter treats every tap; pair it with a softener only if hardness is a real nuisance.
- Private wells outside the service area are a different case; see our well water guide.
FAQ
Is Columbus tap water safe to drink?
Columbus Water & Power reports that its water met all federal standards in 2025, with no violations. Lead in the latest home sampling (2023) was low, with no homes over the action level, but homes with lead or galvanized service lines should consider a certified lead filter. The 2025 report includes no PFAS results; federal PFAS monitoring begins in 2027.
Does Columbus have hard water?
It is moderately hard to hard. The 2025 report lists 98 ppm (5.7 gpg) at Hap Cremean, 123 ppm (7.2 gpg) at Parsons Avenue and 125 ppm (7.3 gpg) at Dublin Road.
Where does Columbus get its water?
From the Scioto River (Griggs and O’Shaughnessy reservoirs), Big Walnut Creek (Hoover Reservoir) and wells in the Scioto River valley, treated at the Dublin Road, Hap Cremean and Parsons Avenue plants.
Sources: Columbus Water & Power 2025 Consumer Confidence Report (2025 data; lead and copper from 2023 sampling) and the Columbus Water & Power water page. Figures change each year; check the newest report for your plant. Some suburbs buy Columbus water but publish their own reports.