Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: Houston tap water stayed below every legal contaminant limit in Houston Public Works’ 2025 Water Quality Report, but the city did record two violations that year: one turbidity exceedance at a treatment plant and one missed chlorite monitoring period. For most homes, the practical concerns are chloramine taste, disinfection by-products and older household plumbing rather than any limit being exceeded.
Houston runs six separate water systems. This guide focuses on the Main System, which serves the large majority of residents; if you live in Kingwood, Willow Chase, District 73, District 82 or Belleau Woods, your numbers are in separate tables of the same report.
Key takeaways
- Roughly 90 percent of Main System water is treated surface water from three lakes on the San Jacinto and Trinity rivers; the rest is deep groundwater.
- The distribution system is disinfected with chloramine, which plain carbon pitchers reduce more slowly than chlorine.
- Hardness varies widely by area, from 43.5 to 229 ppm, so some neighborhoods get soft water and others moderately hard to hard water.
- Lead at the 90th percentile was 5.1 ppb, with no sample above the 15 ppb action level.
Where Houston gets its water
Lake Conroe and Lake Houston on the San Jacinto River and Lake Livingston on the Trinity River supply about 90.3 percent of the Main System. Surface water plants treat the lake water before it enters the pipes. The other 9.7 percent comes from 104 wells that tap the Evangeline and Chicot aquifers more than 750 feet underground.
Because surface water and groundwater blend differently across the service area, water in one part of town can taste a little different from water in another. Chloramine, a mix of chlorine and ammonia, is the disinfectant carried through the pipes; the report lists chloramine readings from 0.04 to 4.8 ppm. Chloramine lasts longer in a big network like Houston’s, but it is harder to remove than free chlorine and must be taken out before water goes into an aquarium or a kidney dialysis machine.
Houston water hardness
The Main System reported total hardness of 43.5 to 229 ppm as calcium carbonate. Converted, that is about 2.5 to 13.4 grains per gallon. The low end is soft water; the high end is hard enough to leave spots on glassware and build scale in tankless water heaters. Your spot on that range depends on how much groundwater reaches your street.
If you see crusty buildup on shower heads or your water heater needs frequent flushing, a softener or scale-control system can pay off. If your water feels fine and kettles stay clean, you are likely in the softer zone and can skip it. A simple hardness test strip will tell you which camp you are in for a few dollars.
Contaminants detected in Houston tap water
Here are the regulated substances Houston Public Works detected in the Main System during 2025. Ranges show the lowest and highest readings; ND means not detected.
| Contaminant | Highest level | Legal limit (MCL) | Health goal (MCLG) | Typical source |
|---|---|---|---|---|
| Total trihalomethanes (highest LRAA) | 43.6 ppb | 80 ppb | None set | Disinfection by-product |
| Haloacetic acids (highest LRAA) | 40.8 ppb | 60 ppb | None set | Disinfection by-product |
| Arsenic | 6.7 ppb (range ND to 6.7) | 10 ppb | 0 | Natural deposits, orchard runoff |
| Combined uranium | 13 ppb | 30 ppb | 0 | Natural deposits |
| Selenium | 7.3 ppb (range ND to 7.3) | 50 ppb | 50 ppb | Refinery discharge, natural deposits |
| Barium | 0.40 ppm (range 0.03 to 0.40) | 2 ppm | 2 ppm | Drilling waste, metal refineries |
| Nitrate | 0.79 ppm (range ND to 0.79) | 10 ppm | 10 ppm | Fertilizer runoff, septic tanks |
| Fluoride | 0.71 ppm (range ND to 0.71) | 4 ppm | 4 ppm | Natural deposits, water additive |
| Gross alpha | 2 pCi/L | 15 pCi/L | 0 | Natural deposits |
| Gross beta | 8.2 pCi/L | 50 pCi/L | 0 | Decay of natural deposits |
| Chlorite | 0.1 ppm (range ND to 0.1) | 1 ppm | 0.8 ppm | Disinfection by-product |
| Total coliform | 2.7 percent of monthly samples positive | 5 percent | 0 | Naturally present in the environment |
| Turbidity | 1.95 NTU (95 percent of monthly readings at or below 0.3 NTU) | Treatment technique | N/A | Soil runoff |
Arsenic is the reading that sits closest to its cap, at about two-thirds of the 10 ppb limit in the highest sample. Reverse osmosis and certain specialty media can reduce arsenic; ordinary carbon pitchers generally are not certified for it. The report also lists lithium, an unregulated substance, at 13.7 to 33.9 ppb. It did not report PFAS detections in the Main System tables.
Secondary measures that affect taste: total dissolved solids ranged from 146 to 331 ppm and sulfate from not detected to 48 ppm.
Lead and copper results
Houston’s sampling at customer taps found 90 percent of homes below 5.1 ppb for lead and below 0.22 ppm for copper, and no samples above the action levels of 15 ppb and 1.3 ppm. The city is still building its inventory of service line materials and asks residents to report what kind of pipe enters their home. If your house predates 1986, has an unknown service line, or you are caring for an infant, use a filter certified to NSF/ANSI 53 for lead at the kitchen tap.
Violations in 2025
- May 2025, turbidity: a single combined filter effluent reading exceeded the turbidity treatment requirement.
- September 2025, chlorite: a major monitoring and reporting violation, meaning required chlorite samples were not collected or reported for that period. It is a paperwork and sampling failure, not a measured exceedance.
Do you need a filter in Houston?
- Chloramine taste or smell: catalytic carbon handles chloramine better than standard carbon. For drinking water, an under-sink reverse osmosis system with a carbon pre-filter also reduces arsenic, uranium and dissolved solids.
- Whole home, hard-water neighborhoods: a catalytic carbon whole-house system, with a softener if your hardness test runs high, protects fixtures and showers. Compare options on our whole-house filters page.
- Apartments and tight budgets: a pitcher or faucet filter certified for lead and chloramine reduction, plus a shower filter for skin and hair; see pitchers and shower filters.
- Private wells outside city limits: city testing does not cover you. Start with our well water guide.
FAQ
Is Houston tap water safe to drink?
Houston Public Works’ 2025 report shows no regulated contaminant above its legal limit in the Main System, but it does list two violations: a May 2025 turbidity exceedance at a filter and a September 2025 chlorite monitoring failure. Lead depends on your home’s pipes, and the city is still completing its service line inventory, so a lead-certified filter is a sensible step for older homes.
Why does Houston tap water taste like chemicals?
The city disinfects with chloramine, which has a mild chlorine-like taste and lingers longer than free chlorine. A catalytic carbon filter or a reverse osmosis system with carbon stages reduces it.
Is Houston water hard or soft?
It depends where you live. The 2025 report lists Main System hardness from 43.5 to 229 ppm, or roughly 2.5 to 13.4 grains per gallon, so some areas get soft water and others hard water.
Sources: Houston Public Works, 2025 Water Quality Report; Houston Public Works drinking water quality report page. Values come from the utility’s 2025 report and change every year.