Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: Indianapolis tap water complied with every regulated limit in 2025, based on the water quality data Citizens Energy Group published for its Indianapolis system, and no violations are listed. What sets it apart is hardness: an average of 317 ppm, or about 19 grains per gallon, which makes Indianapolis one of the hardest big-city supplies we have covered.
Beyond scale, the points to weigh are chloramine as the disinfectant, low-level farm herbicides from the reservoirs, and an estimated 55,000 to 75,000 lead-containing service lines still in the ground. The figures here come from Citizens’ 2025 report and data page; they are updated every year.
Key takeaways
- Hardness averaged 317 ppm (19 gpg) and reached 460 ppm (27 gpg). Expect scale on fixtures and appliances; a softener is worth serious thought.
- Citizens disinfects with chloramine (average 2.0 ppm as total chlorine), so a filter for taste should be rated for chloramine, not just chlorine.
- Lead at the 90th percentile was 4.7 ppb in 2025 sampling; 2 of 106 homes topped the 15 ppb action level, with a high of 19 ppb.
- Two unregulated PFAS (PFBS and PFHxA) were found at trace levels; PFOA and PFOS were not among them.
Where does Indianapolis tap water come from?
Citizens Water serves about 900,000 people across central Indiana, mostly from surface water:
- The West Fork of the White River, backed up by Morse Reservoir, supplies the White River and White River North plants.
- Fall Creek, with Geist Reservoir and Citizens Reservoir, feeds the Fall Creek and White River plants.
- Eagle Creek Reservoir supplies the T.W. Moses plant.
- Six groundwater plants (White River North, Geist Station, Harding Station, South Well Field, Harbour and Ford Road) pump from aquifers, and wells also top up some surface plants.
Surface water goes through coagulation, settling and filtration plus ultraviolet disinfection. The well plants aerate and filter the water to drop out iron and manganese. Citizens then adds chlorine with a small dose of ammonia, which forms chloramine, along with fluoride and an orthophosphate corrosion inhibitor that coats pipe interiors to slow lead release.
Indianapolis water hardness
Hardness in the 2025 data ranged from 148 to 460 ppm, averaging 317 ppm, which Citizens converts to 19 grains per gallon (8.7 to 27 gpg across the range). Anything above 180 ppm is classed as very hard, so most Indianapolis homes sit well past that line.
Water this hard leaves thick scale in water heaters, clogs aerators and showerheads, and cuts the life of dishwashers and tankless heaters. Soap also lathers poorly. Here a water softener is a practical upgrade, not a luxury. A filter alone will not remove hardness. If you add a salt-based softener, remember the supply already averages 44 ppm sodium (up to 139 ppm), so many people keep one unsoftened cold tap or add reverse osmosis for drinking. Our softener or filter guide covers sizing and salt-free options.
What was detected in Indianapolis water in 2025
These are the regulated substances Citizens reported as detected at its treatment plants or in the distribution system. “Highest level” is the maximum value the report lists (for byproducts, the highest locational running annual average).
| Contaminant | Highest level | Legal limit (MCL) | Health goal (MCLG) | Typical source |
|---|---|---|---|---|
| Atrazine | 1.8 ppb (avg 0.29) | 3 ppb (running average) | 3 ppb | Herbicide on row crops |
| Simazine | 0.20 ppb | 4 ppb | 4 ppb | Herbicide runoff |
| Nitrate | 4.0 ppm (avg 1.1) | 10 ppm | 10 ppm | Fertilizer, septic systems |
| Barium | 0.27 ppm (avg 0.13) | 2 ppm | 2 ppm | Natural deposits, drilling waste |
| Fluoride | 0.89 ppm (avg 0.57) | 4 ppm | 4 ppm | Water additive, natural deposits |
| Total xylenes | 3.0 ppb | 10 (printed as ppb; the federal MCL is 10 ppm) | 10 | Petroleum and chemical plants |
| Combined radium 226/228 | 0.70 pCi/L | 5 pCi/L | 0 | Natural deposits |
| Gross alpha | 1.9 pCi/L | 15 pCi/L | 0 | Natural deposits |
| TTHM | 58 ppb LRAA (samples 22–70) | 80 ppb | None | Disinfection byproduct |
| HAA5 | 38 ppb LRAA (samples 12–40) | 60 ppb | None | Disinfection byproduct |
| Turbidity | 0.10 NTU | Treatment technique (always under 1 NTU) | None | Soil runoff |
On the microbial side, one distribution sample tested positive for E. coli in May and total coliforms peaked at 1.1% of samples in July, below the 5% trigger; the report marks both as compliant. Cryptosporidium and Giardia turned up in some raw source water but not in treated water. Secondary measures included chloride up to 184 ppm and sulfate up to 190 ppm, both under the 250 ppm aesthetic guideline.
Lead and copper in Indianapolis
In 2025 home sampling, the 90th percentile for lead was 4.7 ppb, under the 15 ppb action level, but 2 of 106 homes were above it and the top result was 19 ppb. Copper came in at 0.097 ppm at the 90th percentile, with no homes over 1.3 ppm.
Citizens estimates 55,000 to 75,000 lead-containing service lines in its territory and runs a replacement program approved by state regulators in 2022. Check your address on the utility’s service line map. If your line is lead or unknown, run the tap after water has sat for hours, use cold water for cooking, and consider a filter certified to NSF/ANSI 53 for lead. Our lead filter guide explains what to look for.
Violations
None reported. Every regulated contaminant in Citizens’ 2025 Indianapolis table is marked as in compliance.
Do you need a filter in Indianapolis?
- Hardness first: with 19 gpg on average, a softener protects plumbing more than any filter can.
- Chloramine taste and smell: choose catalytic carbon or a filter with an NSF/ANSI 42 chloramine claim. For the whole home, look at whole-house filters built for chloramine.
- Drinking water upgrades: an under-sink reverse osmosis system lowers sodium (especially after softening), nitrate, atrazine and PFAS traces, and RO units certified to NSF/ANSI 58 commonly carry lead claims too.
- Renters or a quick start: a certified pitcher from our pitcher picks handles taste and, if certified for it, lead.
- Private wells in surrounding counties need their own testing; see well water systems.
FAQ
Is Indianapolis tap water safe to drink?
Citizens Energy Group reports that its Indianapolis water met all regulated limits in 2025 with no violations. Lead was below the action level at the 90th percentile, though 2 of 106 homes exceeded it, so homes with lead service lines may want a certified lead filter. Only trace unregulated PFAS (PFBS and PFHxA) were detected.
Does Indianapolis have hard water?
Yes, very hard. The 2025 data shows an average of 317 ppm (19 grains per gallon), ranging from 148 to 460 ppm.
Does Indianapolis use chlorine or chloramine?
Chloramine. Citizens adds chlorine with a small amount of ammonia; the 2025 residual averaged 2.0 ppm measured as total chlorine.
Sources: Citizens Energy Group 2025 Water Quality Report and the Citizens 2025 water quality data for Indianapolis (IN5249004). Values change each year; this page reflects the utility’s 2025 report. Westfield and other Citizens systems have separate reports.