Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: Tucson tap water met federal drinking water standards in 2025, and Tucson Water’s annual report lists no health-based MCL violations or missed monitoring. Most of what flows from Tucson taps is Colorado River water that was soaked into the desert aquifer and pumped back up, so the main things worth knowing are naturally occurring arsenic and uranium, hard-water scale and the chlorine taste. A filter is a comfort and convenience choice here, not an emergency fix.
Key takeaways
- About 78% recharged Colorado River water: Tucson Water’s Main System delivered roughly 78% recovered recharged water (Central Arizona Project supply) and 22% from the Central Well Field in 2025.
- Arsenic is the number to watch: the highest arsenic result was 8.8 ppb against a 10 ppb legal limit. The health goal for arsenic is zero.
- Lead was very low: the 90th percentile lead result was 0.65 ppb (2023 sampling), with no samples above the action level, and the utility says its inventory has found no lead service lines.
- PFAS barely registered: one PFAS (PFBA) turned up once at one well, at 8.1 ppt, out of thousands of PFAS results.
Where Tucson’s water comes from and how it’s treated
For decades Tucson pumped groundwater faster than it could refill. The fix, starting around 2001, was the Central Arizona Project canal: Colorado River water is piped across the desert, spread into recharge basins at CAVSARP, PMRRP and SAVSARP, allowed to percolate into the aquifer, and later pumped out of recovery wells. The Central Well Field covers peak summer demand and acts as a backup.
Because the water is filtered naturally through the ground, the treatment step Tucson Water describes in its report is disinfection with chlorine (not chloramine). The target chlorine residual is 0.80 to 1.2 mg/L, and the 2025 annual average was 1.0 ppm, well below the 4 ppm maximum. Tucson Water serves 244,502 households and businesses on the Main System. If you live in Corona de Tucson, Oro Valley, Marana or another nearby system, your water comes with a different report.
Tucson water hardness
The 2025 report does not print a hardness number in mg/L or grains per gallon, so we can’t quote one. Tucson Water’s own hard-water page says the local groundwater is naturally hard and that hardness rises as more Colorado River water is blended in. The city calls hard water safe to drink and points to the usual side effects: white crust on faucet aerators and showerheads, calcium buildup in evaporative coolers, and shortened life for water heaters and dishwashers.
Since the utility doesn’t publish a figure, the cheapest next step is an inexpensive hardness test strip (the city even suggests a pool test kit). As a rule of thumb, anything above about 7 grains per gallon (120 mg/L) is usually where a softener starts to pay for itself in fewer descaling chores. A carbon filter, by itself, will not remove hardness. Our guide on whether you need a softener or a filter walks through the choice.
What’s in Tucson tap water (2025 results)
These are the regulated contaminants Tucson Water detected in its Main System during 2025, as listed in the utility’s report. Highest level is the top single result.
| Contaminant | Highest level | Legal limit (MCL) | Health goal (MCLG) | Typical source |
|---|---|---|---|---|
| Arsenic | 8.8 ppb (range ND–8.8) | 10 ppb | 0 | Natural deposits; orchard runoff |
| Uranium | 16 ppb (ND–16) | 30 ppb | 0 | Natural deposits |
| Alpha emitters | 4.4 pCi/L (ND–4.4) | 15 pCi/L | 0 | Natural deposits |
| Combined radium 226/228 | 1.44 pCi/L (ND–1.44) | 5 pCi/L | 0 | Natural deposits |
| Nitrate | 6.7 ppm (0.25–6.7) | 10 ppm | 10 ppm | Fertilizer, septic systems, natural deposits |
| Fluoride | 0.80 ppm (0.13–0.80) | 4 ppm | 4 ppm | Natural deposits; water additive |
| Barium | 0.15 ppm (ND–0.15) | 2 ppm | 2 ppm | Natural deposits; drilling wastes |
| Selenium | 4.3 ppb (ND–4.3) | 50 ppb | 50 ppb | Natural deposits; refineries; mines |
| Atrazine | 0.09 ppb (ND–0.09) | 3 ppb | 3 ppb | Herbicide runoff |
| Simazine | 0.05 ppb (ND–0.05) | 4 ppb | 4 ppb | Herbicide runoff |
| TTHM (total trihalomethanes) | 13.6 ppb LRAA (1.8–26.8) | 80 ppb | n/a | Byproduct of chlorination |
| HAA5 (haloacetic acids) | 1.3 ppb LRAA (ND–2.1) | 60 ppb | n/a | Byproduct of chlorination |
Sodium ranged from 22.4 to 70.4 ppm. There is no legal limit for sodium, but people on a low-sodium diet may want to know the number.
The report also lists one E. coli-positive sample in August 2025 under the Revised Total Coliform Rule and marks it as no treatment technique violation. The report doesn’t explain the follow-up.
Lead and copper
Tucson Water’s most recent lead and copper round (2023) found a 90th percentile of 0.65 ppb lead (action level 15 ppb) and 0.135 ppm copper (action level 1.3 ppm), with zero samples above either action level. The utility has removed or replaced more than 866 lead service lines since 1999, plus another 142 through its Get the Lead Out program, and says its current inventory has not found any remaining lead service lines. The report adds that records for the customer-owned side of service lines are incomplete, so an older home with original plumbing or brass fixtures can still be worth a lead test.
PFAS
Tucson’s report lists the new federal PFAS limits (4 ppt each for PFOA and PFOS) but does not print measured PFOA or PFOS values for the Main System. In federal UCMR5 testing, PFBA was detected once at a single well site at 8.1 ppt. The report says every other PFAS tested came back below detection, with one detection among 4,698 PFAS results.
Violations
None reported. The 2025 report states there were no health-based MCL violations and no missed monitoring violations in the Main System.
Do you need a filter in Tucson?
Most Tucson households don’t need a filter for safety based on this report, but several common goals have a clear match:
- Lower arsenic and uranium (both have a health goal of zero): an under-sink reverse osmosis system certified to NSF/ANSI 58 for arsenic reduction is the most reliable choice. RO also cuts nitrate, sodium and fluoride.
- Better taste and less chlorine smell: a pitcher or faucet filter certified to NSF/ANSI 42 is enough.
- Scale on fixtures, coolers and the water heater: test hardness first, then look at a softener. A whole-house filter handles chlorine for the whole home but does not soften water.
- On a private well outside the service area: you’re responsible for your own testing; start with our well water guide.
If arsenic is your main reason, confirm the specific model’s listing includes arsenic before you buy.
Frequently asked questions
Is Tucson tap water safe to drink?
Tucson Water’s 2025 report says the Main System had no health-based MCL violations or missed monitoring violations, and every detected contaminant was below its legal limit. Arsenic reached 8.8 ppb against a 10 ppb limit, lead was 0.65 ppb at the 90th percentile in 2023, and only one PFAS detection (PFBA, 8.1 ppt) was reported.
Where does Tucson get its water?
Mostly from the Colorado River through the Central Arizona Project. In 2025 about 78% of Main System deliveries were recharged CAP water recovered from wells, and about 22% came from the Central Well Field.
Does Tucson have hard water?
Yes. Tucson Water says its groundwater is naturally hard and that hardness rises as more Colorado River water is blended in, but the 2025 report gives no hardness number. A home test strip will tell you whether a softener is worth it.
Sources: Tucson Water 2025 Annual Water Quality Report, Main System; Tucson Water 2025 annual water quality reports page; Tucson Water hard water page. Values change from year to year; the numbers on this page come from the utility’s 2025 report.