What Filter Removes PFAS? Certifications Explained

Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

What Filter Removes PFAS? Certifications Explained: illustration of a water quality guide

Short answer: The filters that remove PFAS are reverse osmosis systems and activated carbon or ion exchange filters that are certified for PFAS reduction under NSF/ANSI 53 or NSF/ANSI 58. Asking what filter removes PFAS really means asking which certification to look for, because two filters that look alike on a store shelf can perform very differently on these chemicals.

Key takeaways

  • Reverse osmosis is the most reliable home option and covers short-chain PFAS that carbon handles less well.
  • Carbon filters can work, but only buy one whose listing names PFOA and PFOS, or “total PFAS,” under NSF/ANSI 53.
  • “Removes PFAS” on a box means little unless you can find the same model in an NSF, IAPMO or WQA certification listing.
  • Change cartridges on schedule. A spent carbon filter stops capturing PFAS without any change you can taste.

What PFAS are and why your tap water matters

PFAS (per- and polyfluoroalkyl substances) are a large family of man-made chemicals used in nonstick coatings, stain-resistant fabrics, food packaging and firefighting foam. They break down extremely slowly, which earned them the nickname “forever chemicals,” and several have been linked to health effects with long-term exposure.

In April 2024 the EPA set the first national drinking water limits for PFAS: 4 parts per trillion each for PFOA and PFOS, and 10 ppt for PFHxS, PFNA and GenX, plus a combined “hazard index” for mixtures. In May 2026 the agency proposed rescinding the limits for everything except PFOA and PFOS and pushing the compliance deadline for those two back to 2031. Those proposals were not final at the time of writing, so check the EPA’s PFAS rule page for the current status.

Whatever happens to the rules, your utility’s annual water quality report is the place to see whether PFAS show up in your water. Our guide on how to read a water quality report walks through where to find the PFAS table, and our city pages summarize the numbers for specific cities.

What filter removes PFAS? The certifications explained

Independent certification is the only practical way for a homeowner to know a filter works on PFAS. Three organizations test and list drinking water filters to the American National Standards for this: NSF International, IAPMO and the Water Quality Association. They all test to the same standards, so any of the three listings counts.

NSF/ANSI 53 (filters, pitchers, under-sink and faucet units)

NSF/ANSI 53 covers health-related contaminants for carbon and other non-RO filters. According to NSF, the standard first added PFOA and PFOS reduction for activated carbon in its 2018 edition and for anion exchange media in 2019. The 2022 edition added a broader “total PFAS” claim that tests a group of compounds together: PFOA, PFOS, PFHxS, PFNA, PFHpA, PFBS and PFDA.

What to look for on the listing: the words “PFOA/PFOS reduction” or “Total PFAS reduction” next to the exact model and cartridge you plan to buy.

NSF/ANSI 58 (reverse osmosis)

NSF/ANSI 58 is the standard for reverse osmosis systems. RO units can also be listed for PFOA/PFOS reduction under it. A system certified only for total dissolved solids under 58 has not been verified for PFAS, so check that the PFAS claim itself appears.

NSF/ANSI 42 and 401

NSF/ANSI 42 covers chlorine taste and odor, not PFAS. NSF/ANSI 401 covers a list of “emerging” compounds such as some medications, also not PFAS. A filter certified only to 42 or 401 should not be bought for PFAS.

A note on thresholds

The original PFOA/PFOS test was written around the EPA’s older 70 ppt health advisory, which is far higher than today’s 4 ppt limit. A certified filter may well do better than that in your home, but the certification itself does not promise single-digit results. That is one more reason to change cartridges early rather than late.

Which filter types work best

Filter type PFAS performance Certification to look for Typical upkeep
Under-sink reverse osmosis Strongest; handles long- and short-chain PFAS NSF/ANSI 58 with PFOA/PFOS claim Prefilters every 6–12 months, membrane every 2–3 years
Countertop reverse osmosis Similar to under-sink RO, no plumbing needed NSF/ANSI 58 with PFOA/PFOS claim Filter changes per maker’s schedule
Under-sink carbon block Good when certified; weaker on short-chain PFAS NSF/ANSI 53 PFOA/PFOS or total PFAS Cartridge every 6–12 months
Pitcher or dispenser Varies widely; only a few models are certified NSF/ANSI 53 PFOA/PFOS Cartridge every 1–3 months
Whole-house carbon Can reduce PFAS at every tap if sized for it NSF/ANSI 53 claim for the whole system, if available Media every few years
Refrigerator filter Rarely certified for PFAS NSF/ANSI 53 PFOA/PFOS Every 6 months

EPA researchers who tested home systems found that both reverse osmosis and granular activated carbon units could bring PFAS below detection under their study conditions, while noting that results depend on water chemistry and on replacing membranes and filters on time.

For most households, the sensible split is: reverse osmosis for drinking and cooking water, and a whole-house system only if you also want chlorine or chloramine taken out at every shower and faucet. Health agencies generally treat drinking and cooking water, not showering, as the main PFAS exposure route from tap water.

How to check a filter’s PFAS claim in five minutes

  1. Write down the exact model number and the replacement cartridge number.
  2. Open the NSF listings search (or the IAPMO or WQA directory if the box names one of those).
  3. Search by brand, then find your model.
  4. Confirm the listing shows “PFOA/PFOS” or “Total PFAS” under NSF/ANSI 53 or 58.
  5. Note the rated capacity in gallons and plan cartridge changes before you reach it.

If the model is not in any listing, treat a PFAS claim on the box as unverified, even if the brand says “tested to NSF standards.” Tested to a standard is not the same as certified to it.

Common mistakes

  • Buying a softener for PFAS. Water softeners exchange hardness minerals; they are not designed or certified for PFAS.
  • Boiling water. Boiling does not remove PFAS and can slightly concentrate them as water evaporates.
  • Using a pitcher certified only for chlorine. Many popular pitchers carry NSF/ANSI 42 and nothing for PFAS. Our pitcher and shower filter guide flags which claims to look for.
  • Stretching cartridge life. Once carbon is saturated, PFAS can pass through. Follow the gallon rating, not just the calendar.

On a private well?

Utilities test for PFAS; private wells are tested only if the owner does it. If you live near an airport, military base, fire training site or industrial area, a certified lab test is worth the cost before choosing equipment. Our well water guide covers point-of-entry systems that treat the whole house.

FAQ

What filter removes PFAS from drinking water?

Reverse osmosis systems and activated carbon or ion exchange filters certified for PFOA/PFOS or total PFAS reduction under NSF/ANSI 53 or 58. Confirm the exact model in an NSF, IAPMO or WQA listing before buying.

Does a Brita filter remove PFAS?

It depends on the cartridge. Check the specific model in the NSF listings; a cartridge certified only to NSF/ANSI 42 for chlorine taste and odor has not been verified for PFAS.

Is reverse osmosis better than carbon for PFAS?

Generally yes. Reverse osmosis handles both long-chain and short-chain PFAS well, while carbon is strongest on long-chain compounds such as PFOA and PFOS and needs more frequent replacement.

Sources: EPA, Per- and Polyfluoroalkyl Substances (PFAS) drinking water regulation; Federal Register, proposed rescission for four PFAS (May 2026); Federal Register, proposed PFOA/PFOS compliance extension (May 2026); NSF, PFAS in drinking water; NSF, total PFAS reduction under NSF/ANSI 53; EPA research on home PFAS treatment systems; NSF certified drinking water treatment units listing.