Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: San Jose tap water met every state and federal drinking water standard in 2025, according to San Jose Water’s annual report, and no violations were listed. The bigger day-to-day issues are hardness (groundwater averages almost 17 grains per gallon), chromium-6 from wells, and low levels of PFAS in some wells, which the utility plans to treat at its Williams Station site.
This guide to San Jose tap water is built from San Jose Water’s 2025 Annual Water Quality Report. San Jose Water is the private utility serving over one million people in the greater San Jose area, which covers most of the city. Parts of North San Jose, Alviso, Evergreen and Coyote Valley get water from the City of San José Municipal Water System instead, and that system publishes its own report. Values change every year; the numbers below come from the 2025 report.
Key takeaways
- No violations: the 2025 report states that all results met state and federal standards.
- Hard water: groundwater averages 288 ppm (16.8 gpg), and some wells reach 451 ppm (26.4 gpg). Which source reaches your tap changes how hard it is.
- PFAS: PFOS was above California’s 4 ppt notification level at 2 of 76 active wells (both at Williams Station), where a treatment plant is designed and construction is expected in 2026/2027.
- Lead: San Jose Water reports no lead service lines; the 2025 lead 90th percentile was 2.1 ppb (spring) and 1.6 ppb (fall), with 1 home over the action level in each round.
Where San Jose tap water comes from
San Jose Water blends three kinds of supply, and the mix at your faucet depends on your neighborhood and the season. The first is local groundwater pumped from wells; the report lists 88 groundwater wells in its PFAS monitoring program. The second is mountain surface water from the utility’s watershed land in the Santa Cruz Mountains, about 6,000 acres around Los Gatos Creek and Saratoga Creek, treated at the utility’s own plants. The third is treated imported surface water bought from Valley Water, the county water wholesaler.
The report gives a total chlorine running annual average of 1.42 ppm in the distribution system, against a maximum disinfectant level of 4.0 ppm. It also notes that both chlorine and chloramine may be present depending on the source. Fluoride is added to the Valley Water supply by the wholesaler and averaged 0.753 ppm.
San Jose water hardness
Hardness is the most noticeable trait of San Jose tap water, and it varies a lot by source. The report lists these averages (as calcium carbonate):
| Source | Average hardness | Range |
|---|---|---|
| Groundwater (wells) | 288 ppm (16.8 gpg) | 175–451 ppm (10.2–26.4 gpg) |
| Mountain surface water | 151 ppm (9 gpg) | 151 ppm (9 gpg) |
| Valley Water imported | 99 ppm (5.8 gpg) | 77–146 ppm (4.5–8.5 gpg) |
Anything above about 7 grains per gallon counts as hard, and the groundwater average lands well into the very hard range. Well-fed homes see crusty faucets, spotty dishes and faster scale in water heaters. If your home gets mostly well water, a salt-based softener is the tool that removes calcium and magnesium; carbon filters and pitchers do not. Homes on the Valley Water supply sit near the moderate line and may not need one. Our softener vs filter guide walks through the choice.
Detected contaminants in San Jose tap water
The table lists regulated substances San Jose Water detected in 2025. California uses public health goals (PHGs) where the federal system uses MCLGs, so the health-goal column shows the PHG or MCLG printed in the report. Results are averages with the range in brackets.
| Contaminant | Highest level | Legal limit (MCL) | Health goal (MCLG/PHG) | Typical source |
|---|---|---|---|---|
| Chromium-6 | 4.67 ppb avg in groundwater (0.74–8.54) | 10 ppb | 0.02 ppb | Natural erosion; industrial discharge |
| Nitrate (as N) | 3.1 ppm avg in groundwater (0.61–6.5) | 10 ppm | 10 ppm | Fertilizer runoff, septic systems, natural deposits |
| Arsenic | ND (ND–2.2 ppb) in groundwater | 10 ppb | 0.004 ppb | Natural deposits; industrial waste |
| Barium | 0.104 ppm avg in groundwater (ND–0.29) | 1 ppm | 2 ppm | Natural deposits; discharge |
| Combined radium | ND (ND–2.6 pCi/L) in groundwater | 5 pCi/L | 0 | Natural deposits |
| Uranium | 1.3 pCi/L (Valley Water) | 20 pCi/L | 0.43 pCi/L | Natural deposits |
| Bromate | 1.5 ppb avg (ND–5.4), Valley Water | 10 ppb | 0.1 ppb | Byproduct of ozone disinfection |
| Total trihalomethanes (TTHM) | 47.7 ppb highest site average | 80 ppb | n/a | Byproduct of chlorine disinfection |
| Haloacetic acids (HAA5) | 27.3 ppb highest site average | 60 ppb | n/a | Byproduct of chlorine disinfection |
Two things stand out. Chromium-6 from local wells averaged 4.67 ppb, under California’s 10 ppb limit but far above the 0.02 ppb health goal. And nitrate in some wells reached 6.5 ppm, about two-thirds of the limit, which is worth noting if you prepare infant formula with tap water. Reverse osmosis reduces both.
PFAS in San Jose water
California sets notification levels (NL) and response levels for PFAS. In groundwater, PFHxS averaged 3.2 ppt (up to 9.8), PFOS 2.5 ppt (up to 9.7) and PFOA was non-detect (up to 4.6); the maximums include standby wells that don’t serve customers. PFOS topped its 4 ppt notification level at two active wells at Williams Station, and a treatment facility there is designed with construction expected in 2026/2027. Surface water sources averaged about 1 ppt or less. The federal PFOA and PFOS limits of 4 ppt are not enforceable yet. See what filter removes PFAS for certified options.
Lead and copper
Lead and copper are measured at customer taps because they come from household plumbing, not the source water. San Jose Water sampled twice in 2025:
- Lead, spring 2025: 90th percentile 2.1 ppb, range ND–17 ppb, 1 of 103 homes over the 15 ppb action level.
- Lead, fall 2025: 90th percentile 1.6 ppb, range ND–810 ppb, 1 of 102 homes over the action level.
- Copper: 90th percentile 0.58 ppm (spring) and 0.56 ppm (fall) against a 1.3 ppm action level, 1 home over in each round.
The utility says it has no lead service lines and finished its service line inventory in 2024. It did find a small number of lead goosenecks on some pre-1946 service lines, which are being replaced with water main work. If your house is older, run the tap before drinking after water sits, and consider an NSF/ANSI 53 lead-certified filter. Our lead filter guide explains what to look for.
Violations
None reported. The 2025 report states that results met all state and federal standards. Note that the report’s own text calls the lead 90th percentile below detection, while its table lists 2.1 and 1.6 ppb; we show the table values.
Do you need a filter in San Jose?
You don’t need one to meet federal or state standards, but several findings point to useful upgrades:
- Chromium-6, nitrate or PFAS concerns: an under-sink reverse osmosis system certified to NSF/ANSI 58 is the strongest single choice for drinking and cooking water.
- Chlorine or chloramine taste: a carbon pitcher or faucet filter from our pitchers and shower filters picks is the cheapest fix; choose one rated for chloramine if your area gets it.
- Scale from well-fed supply: a softener, optionally with a whole-house carbon filter for taste at every tap. On a private well instead? Test it and see our well water guide.
FAQ
Is San Jose tap water safe to drink?
San Jose Water’s 2025 report states that its water met all state and federal drinking water standards, and it lists no violations. PFOS exceeded California’s notification level at two active wells, and treatment is planned there. Homes with older plumbing can still see higher lead at the tap, so a certified lead filter is a reasonable precaution.
Does San Jose have hard water?
Yes, in most areas. San Jose Water’s groundwater averages 288 ppm (16.8 grains per gallon), mountain surface water 151 ppm (9 gpg) and Valley Water supply 99 ppm (5.8 gpg), so hardness depends on which source reaches your home.
Where does San Jose get its water?
San Jose Water blends local groundwater from wells, surface water from its Santa Cruz Mountains watershed, and treated imported water bought from Valley Water. Some neighborhoods are served by the City of San José Municipal Water System instead.
Sources: San Jose Water, 2025 Annual Water Quality Report; San Jose Water, 2025 water quality report press release. Values change each year; everything above comes from the utility’s 2025 report.