Epic Pure Water Filter Pitcher Review

Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Epic Pure Water Filter Pitcher Review: illustration of a review badge with a check mark

Short answer: the Epic Pure water filter pitcher is a good fit if you want a pitcher that claims to cut fluoride and PFAS, two things most budget pitchers ignore, and you are comfortable relying on lab test reports rather than a full certification for those claims. Its NSF certification covers chlorine taste and odor (NSF/ANSI 42) and lead-free materials (NSF/ANSI/CAN 372), while its lead, PFAS and fluoride numbers come from third-party testing that Epic publishes itself.

This Epic Pure review is built from Epic’s official product pages, its published data sheet and its own statements about certification. We did not test the pitcher ourselves. Prices are approximate and change often.

Key takeaways

  • The current model is the Pure XP pitcher (about $79 to $82 on Epic’s site), which replaced the original Pure. XP cartridges also fit the older Pure pitcher.
  • Certified by NSF to NSF/ANSI 42 and NSF/ANSI/CAN 372, per Epic. The broader contaminant claims are “tested to” NSF/ANSI 42, 53, 401 and P231, not certified to them.
  • Each XP cartridge is rated for 100 gallons, roughly 3 to 4 months for a typical household.
  • Best for fluoride-conscious buyers and renters; buyers who want a certified lead claim should look at the options under “Who it’s not for”.

Epic Pure pitcher: quick facts

SpecEpic Pure XP (current)
Approximate price$79–$82 (pitcher with one filter)
Filter typeGravity cartridge: carbon fiber block inner layer plus nanofiber media
Rated filter life100 gallons per cartridge (about 3–4 months, per Epic)
Filtering timeAbout 10–15 minutes per full pitcher, per Epic
Certified (per Epic’s NSF page)NSF/ANSI 42, NSF/ANSI/CAN 372
Tested, not certifiedNSF/ANSI 42, 53, 401 and P231 test protocols; PFAS to NSF/ANSI 53 criteria
MaterialsBPA- and BPS-free polypropylene and Tritan
Warranty3 years
AssembledPalmetto, Florida

What changed from the original Epic Pure

Many reviews online still describe the original Epic Pure, whose filter (model EW-RFP-TAP) was rated for 150 gallons in Epic’s 2023 performance data sheet. The Pure XP keeps the same idea, a dense carbon cartridge aimed at a long contaminant list, but changes the build. The outer case stays in the pitcher and only the inner cartridge is swapped, which Epic says cuts plastic per refill by up to 75%. Epic also describes a new layered media with a more open pore structure that it says flows faster.

The trade-off on paper is capacity: XP cartridges are rated for 100 gallons against the older filter’s 150. Epic states the XP cartridges are backward compatible with Epic-branded pitchers and dispensers, so original Pure owners can switch without buying a new jug.

Certifications: what is certified and what is only tested

This is the most important part of any pitcher review, and Epic is fairly open about it. Its NSF certification page lists the Pure XP under NSF/ANSI 42 (aesthetic chlorine reduction) and NSF/ANSI/CAN 372 (lead-free materials) and points readers to NSF’s own database to confirm. Neither standard covers lead, PFAS or fluoride reduction.

For those health-related contaminants, Epic relies on independent lab testing. Its help center says the Pure pitcher filter was tested by a third party and exceeds NSF/ANSI 42, 53, 401 and P231, and that it “hasn’t been certified by the company NSF.” The lab is not named. Epic points shoppers who want a certified option to its Smart Shield filter, which it says IAPMO certified to NSF/ANSI 42, 53 and 401.

Why it matters: certification means an accredited body checks the product, its claims and the factory on an ongoing basis. A one-time test report, even a good one, is a snapshot that you take on trust. Our How we choose filters page explains how we weigh the two.

Contaminant claims

Epic’s 2023 performance data sheet for the original Pure filter reports these reductions from its third-party testing (tested, not certified):

ContaminantReported reduction (original Pure filter)
Lead99.94%
PFOA / PFOSover 99.6% / over 99.8%
Fluoride97.88%
Chlorine98.4%
Chloramine98.89%
Arsenic94%
Nitrate88.2%
Microplastics99.62%

The Pure XP product page shows rounded figures in the same range, such as 99.2% for fluoride and 99.9% for PFAS and lead, and describes reductions of more than 70 contaminants. Fluoride reduction is the standout: few gravity pitchers claim it at all, and none of the NSF standards for pitchers includes a fluoride claim, so no pitcher can show a fluoride certification. Remember that these percentages come from the test conditions in the report, not from your tap.

Who the Epic Pure is for

  • People who want lower fluoride in drinking water without installing reverse osmosis.
  • Renters and apartment dwellers who need something that requires no installation.
  • Homes on chloramine-treated city water who want better taste, since Epic reports chloramine reduction as well.
  • Shoppers who prefer a refillable cartridge with less plastic waste.

Who it’s not for

  • Anyone who specifically needs a certified lead reduction claim, for example in a home with a known lead service line. Pick a pitcher or faucet filter certified to NSF/ANSI 53 for lead; see what filter removes lead.
  • Buyers who want independently certified PFAS reduction; our PFAS filter guide lists what to look for, and an NSF/ANSI 58 reverse osmosis unit such as the one in our AquaTru review is a stronger route.
  • Large households that drink a lot of water. At 10 to 15 minutes a fill and 100 gallons per cartridge, you will refill and replace often; a reverse osmosis system or a dispenser may suit you better.

Costs, including yearly filter cost

The Pure XP pitcher runs about $79 to $82 with one cartridge. Epic sells a case plus two XP cartridges for about $150, and its six-pack works out to “as low as $0.46 per gallon,” according to Epic. A household that drinks around 300 to 400 gallons a year (three to four cartridges) would spend roughly $140 to $185 a year at that rate, more if buying cartridges singly. That is higher than a basic chlorine-only pitcher, which is the price of the longer contaminant list. Epic offers a subscription discount on replacements.

Setup and daily use

There is nothing to install. Epic asks you to fill and discard two full pitchers before first use, and says early flow may be slow while the media wets out. After that, expect 10 to 15 minutes for a full pitcher. Replace the inner cartridge every 3 to 4 months with normal use, sooner if you fill it three or more times a day, and wash the reservoir by hand between changes.

Pros and cons

Pros

  • Claims reduction of fluoride, PFAS, lead and chloramine, a broad list for a pitcher.
  • NSF certified for chlorine taste and odor and for lead-free materials.
  • Refill design replaces only the inner cartridge, cutting plastic waste.
  • BPA/BPS-free materials, 3-year warranty, assembled in the US.

Cons

  • Lead, PFAS and fluoride claims are tested, not certified, and the lab is not named.
  • XP cartridges are rated for 100 gallons, less than the original Pure’s 150.
  • Yearly filter cost is higher than basic pitchers.
  • Gravity filtering is slow for big households.

Verdict

The Epic Pure (now Pure XP) is one of the few pitchers that aims at fluoride and PFAS, and Epic is clearer than most brands about where its certification stops. If fluoride is your main concern and you are fine trusting published test data, it is a reasonable choice. If your priority is a certified lead or PFAS claim, a pitcher certified to NSF/ANSI 53, or an NSF/ANSI 58 reverse osmosis system, is the safer bet. Compare it with other picks in our pitcher guide, or browse more reviews.

Official site: Epic Water Filters pitchers and dispensers.

FAQ

Is the Epic Pure pitcher NSF certified?

Partly. Epic says the Pure XP is NSF certified to NSF/ANSI 42 for chlorine taste and odor and NSF/ANSI/CAN 372 for lead-free materials. Its lead, PFAS and fluoride claims come from third-party testing to NSF protocols, not certification.

Does the Epic Pure remove fluoride?

Epic reports fluoride reduction of 97.88% for the original Pure filter and 99.2% on the Pure XP page, based on its own third-party testing. No NSF pitcher standard covers fluoride, so this claim cannot be certified.

How often do you replace the Epic Pure XP filter?

Epic rates each XP cartridge for 100 gallons, which it says lasts about 3 to 4 months with typical use, or 2 to 3 months with heavy use.

Do Pure XP filters fit the original Epic Pure pitcher?

Yes. Epic says XP cartridges are backward compatible with all Epic-branded pitchers and dispensers, including the original Pure Pitcher.

Sources: Epic Pure XP pitcher product page, Epic NSF certification page, Epic help center on NSF/ANSI certification, Epic Pure performance data sheet (2023) and Pure XP cartridge bundle page. Prices are approximate.