Disclosure: we may earn a commission from links on this page, at no cost to you. How we choose filters.

Short answer: The Waterdrop G3P600 is a tankless under-sink reverse osmosis system that delivers up to 600 gallons per day with a 2:1 pure-to-drain ratio, and Waterdrop says IAPMO R&T certified it to NSF/ANSI 58 and 372. In this Waterdrop reverse osmosis review we think it suits homeowners who want fast, filtered water at the kitchen sink without a storage tank, as long as they have an outlet under the sink and don’t need a named certifier for every contaminant claim.
We don’t run lab tests ourselves. This review is built from Waterdrop’s official product and filter pages; prices are approximate and change often. Here is how the G3P600 stacks up on cost, certification, installation and day-to-day use.
Key takeaways
- Fast and compact: 600 GPD, tankless, about 18 × 5.7 × 17.7 inches, so it leaves room in the sink cabinet.
- Efficient for RO: 2:1 means roughly one gallon goes down the drain for every two you drink, far less waste than older 1:3 or 1:4 tank systems.
- Certification is partial: Waterdrop names IAPMO R&T for NSF/ANSI 58 and 372; its NSF/ANSI 42 and 53 mentions don’t name a certifier, so we treat those as unverified.
- Running cost: Waterdrop’s own estimate is $144.97 a year in filters, which matches our math from the listed filter prices.
Quick facts
| Spec | Waterdrop G3P600 (per official page) |
|---|---|
| Type | Under-sink reverse osmosis, tankless |
| Rated output | 600 gallons per day |
| Pure-to-drain ratio | 2:1 |
| Stages | 8-stage filtration (three cartridges), 0.0001 μm RO membrane |
| Price | About $439 on sale (regular $539) |
| Yearly filter cost | About $145 (Waterdrop estimate $144.97) |
| Certification named | IAPMO R&T: NSF/ANSI 58 and NSF/ANSI 372 |
| Power | Needs an electrical outlet (adapter included) |
| Size and weight | 18.11 × 5.67 × 17.73 in, 32.4 lb |
| Faucet | Smart faucet with live TDS reading and filter alerts |
| Warranty | 1 year (manufacturing defects); 30-day returns |
How the G3P600 works
Most under-sink RO systems push water slowly through a membrane and park it in a pressurized tank. The G3P600 replaces the tank with a built-in pump, so it filters on demand. That is why it needs power and why it can claim 600 gallons per day: there is no tank to run low after you fill a large pot.
Water passes through three replaceable cartridges. The CF cartridge combines sediment filtering with carbon to catch rust, sand and chlorine before they reach the membrane. The RO cartridge holds the membrane that does the heavy lifting on dissolved solids, metals and many chemicals. The CB carbon block cartridge polishes taste on the way to the faucet. Waterdrop counts the layers inside these cartridges to arrive at eight stages. Optional add-on cartridges (a remineralization filter and an alkaline filter) are sold separately.
Waterdrop lists TDS, PFOA, PFOS, chlorine, fluoride, barium, arsenic, chromium-6, lead, sediment and microplastics among the substances it reduces, but the product page gives no percentages. For performance figures, the certified claims on its performance data sheet are the ones that matter.
Who it’s for and who should skip it
Good fit
- Homeowners on city water who want RO-level drinking water and don’t want a tank taking up the cabinet.
- Households that use a lot of filtered water for cooking, coffee and refilling bottles, where 600 GPD flow is a real convenience.
- Renters or DIYers comfortable drilling a drain saddle, or owners whose sink already has a spare faucet hole.
- Anyone in a city where the water report flags PFAS, nitrate or high dissolved solids, such as several cities in our tap water by city guides.
Probably not for you
- Kitchens with no outlet under the sink, since the pump needs power.
- Renters who can’t drill or modify plumbing; a countertop unit such as the one in our AquaTru review needs no installation.
- Buyers who want every contaminant claim certified by a named lab; Waterdrop only names a certifier for NSF/ANSI 58 and 372.
- Homes that want filtered water at every faucet and shower; that’s a job for a whole-house filter.
Certifications
The certification picture on Waterdrop’s own page is a little messy, so it helps to separate the claims. In its detailed certification section, Waterdrop says IAPMO R&T tested and certified the G3P600 against NSF/ANSI 58, the standard for reverse osmosis systems, for the claims on its performance data sheet, and against NSF/ANSI 372, the low-lead materials standard. Those are the two claims we treat as verified by a named third party.
Elsewhere the page heading lists NSF/ANSI 42, 53, 58 and 372, while the spec and comparison tables list 42, 58 and 372. NSF/ANSI 42 covers taste and chlorine; NSF/ANSI 53 covers health contaminants such as lead. Because the page doesn’t name who certified 42 or 53, and because it is inconsistent about 53, we treat those as unverified claims. If lead or a specific contaminant is your main concern, ask Waterdrop for the IAPMO listing and the performance data sheet before buying, and compare against our lead filter guide and PFAS filter guide.
Costs, including yearly filter cost
At the time we checked, Waterdrop listed the G3P600 at about $439, down from a regular $539, with a 30-day price protection policy and free US shipping. Prices on this model move around with promotions, so treat the figure as approximate.
| Replacement cartridge | Listed price | Rated life |
|---|---|---|
| CF (sediment + carbon) | About $29.99 | Up to 6 months or 550 gallons |
| CB (carbon block) | About $29.99 | Up to 12 months or 1,100 gallons |
| RO membrane cartridge | About $109.99 | Up to 24 months or 2,200 gallons |
| Optional remineralization (MNR35) | About $29.99 | Up to 12 months or 1,100 gallons |
| Optional alkaline (ALK35) | About $33.99 | Up to 6 months or 550 gallons |
A typical year means two CF cartridges, one CB cartridge and half the cost of an RO cartridge: about $60 + $30 + $55, or roughly $145. That lines up with the $144.97 yearly cost Waterdrop prints in its comparison table. Subscribing trims the CF and CB cartridges to about $28.49 and the RO cartridge to about $104.49. Hard or high-sediment water may wear the CF cartridge out faster than six months.
Waste water is a hidden cost. At a 2:1 ratio, making 10 gallons of drinking water sends about 5 gallons to the drain. That is modest by RO standards, and the AquaTru countertop unit is more efficient still; see our AquaTru vs Waterdrop comparison for the side-by-side.
Installation
Waterdrop says installation takes about 30 minutes without a plumber. The kit includes a feed water adapter for 3/8 to 1/2 inch supply valves, 3/8 and 1/4 inch tubing, a 1/4 inch drain saddle, lock clips, Teflon tape, a power adapter and the smart faucet. You will need to connect the adapter to the cold water line, clamp the drain saddle onto the sink drain pipe (which means drilling a small hole), mount the faucet in a spare hole or drill one through the counter or sink, and plug the unit in.
The system is rated for indoor use only, so it isn’t suited to a garage or outdoor kitchen. Waterdrop’s product page doesn’t list a minimum or maximum inlet pressure; if your home has very high or very low pressure, check the manual before buying.
Pros and cons
Pros
- No tank, so it frees cabinet space and delivers water on demand.
- 600 GPD rated output and a 2:1 pure-to-drain ratio.
- IAPMO R&T certification to NSF/ANSI 58 and 372, named on the official page.
- Smart faucet shows live TDS and reminds you when to change filters.
- About $145 a year in filters, by Waterdrop’s estimate and ours.
Cons
- Needs an outlet under the sink.
- NSF/ANSI 42 and 53 claims don’t name a certifier, and the page lists the standards inconsistently.
- No reduction percentages on the product page.
- Only a 1-year warranty.
- Removes beneficial minerals along with contaminants unless you add the optional remineralization cartridge.
Verdict
For city-water homes that want reverse osmosis at the kitchen sink and have a spare outlet, the Waterdrop G3P600 is a strong value. The tankless design and 2:1 ratio are real advantages over older tank systems, the yearly filter cost is moderate, and the NSF/ANSI 58 certification through IAPMO R&T is named on Waterdrop’s own page. The weak spots are the short warranty and the vague certification wording for NSF/ANSI 42 and 53. If you can’t drill or don’t have power under the sink, a countertop system is the simpler choice. Browse more reviews or our reverse osmosis guide to compare.
FAQ
Is the Waterdrop G3P600 NSF certified?
Waterdrop says IAPMO R&T certified the G3P600 to NSF/ANSI 58 (reverse osmosis) and NSF/ANSI 372 (lead-free materials). Its page also mentions NSF/ANSI 42 and 53 without naming a certifier, so we treat those claims as unverified.
How often do you change Waterdrop RO filters?
Waterdrop rates the CF cartridge for up to 6 months or 550 gallons, the CB carbon block for up to 12 months or 1,100 gallons, and the RO cartridge for up to 24 months or 2,200 gallons.
Does the Waterdrop G3P600 need electricity?
Yes. The tankless design uses a built-in pump, so it needs an outlet under the sink; a power adapter is included.
How much water does the Waterdrop G3P600 waste?
Waterdrop lists a 2:1 pure-to-drain ratio, which means about one gallon goes to the drain for every two gallons of filtered water.
Sources: Waterdrop, G3P600 reverse osmosis system product page; Waterdrop, G3P600 replacement filter set page. Brand link: Waterdrop official site. Prices are approximate and were taken from the official pages.